Wednesday, December 5, 2012

770G and 772G Off-Highway Truck: Fan Drive Troubleshooting

Verify that the Fan Drive is ON

The fan drive may be turned ON or the fan drive may be turned OFF through the Electronic Technician (ET). When the Fan drive is ON, the fan drive is in a variable speed mode. When the fan drive is OFF, the fan drive is in the locked up mode.

Locking up the fan drive can verify that the fan drive is mechanically sound and hydraulically sound. In order to change the mode of the fan drive, use ET and the procedure that follows:

Typical view

After connecting with ET, select the engine ECM.

Typical view

Select the tool configuration icon.

Typical view

After selecting the tool configuration icon, select the "ECM Configuration Parameters".

Typical view

Select the "Engine Fan Control" with a double click.

Typical view

Select the drop-down menu next to the value. Select the "ON" parameter in order to enable the engine fan control. Ensure that the new value reads "ON". Select the "OK" button.

Typical view

Select "YES" in order to enable the engine fan control.

MARYGAR

Artikel Terkait 770G and 772G Off-Highway Truck: Fan Drive Troubleshooting :

770G and 772G Off-Highway Truck; Hydraulic Fan Drive SystemFan drive hydraulic system(1) Hydraulic tank(2) Case drain oil filter(3) Fan drive pump(4) Speed sensor(5) Fan drive motor(6) Coo ...
770G and 772G Off-Highway Truck: Rear Suspension (Cylinder)The rear suspension cylinders are fastened between supports on the rear of the machine frame and to the rear axle housing. The su ...
770G and 772G Off-Highway Truck:Piston Pump (Steering, Fan)(1) Steering piston pump(2) Pressure and flow compensator valveThe steering piston pump is a pressure compensated variable displa ...
770G and 772G Off-Highway Truck: Rear Suspension (Cylinder) - Purge and ChargePerform Testing and Adjusting, "Visual Inspections" before you service the suspension cylinders.The machine must be on level grou ...
770G and 772G Off-Highway Truck: Piston Pump (Steering, Fan) - Test and AdjustIntroductionWe are checking the pressures at the control manifold for the steering system.This procedure includes the following t ...